Photopolymer Plate

Photopolymer Plate

Plate size is 8-1/4" x 11-3/4 sheets and can be cut and customized to fit most any project. These Photopolymer Plates can be scored or marked on the back with permanent marker and cut with scissors. Get the exact size you need.

These durable plates offer more support and stability than liquid packs. It's easy to get the textured plate you have always wanted. Photopolymer Plates are used with the same negative papers as liquid photopolymer, and can be used with photopolymer frames or an acrylic work surface.

• 67 Durometer, good for fine lines down to .25pt and dots 1 pt thick. The lines will hold up under deep impressions with this plate.
• With harder durometer, the KF95 plate may dry out, become brittle, and curl quicker than softer plastic backed plates (expected life of plate is 9-12 months with proper care).
• When washed out, background is clear and relief is light yellow.

How to use Plastic-backed Photopolymer Plates

Mark and cut down your Photopolymer plate to your desired size. Remove the protective plastic UV covering on the plate before proceeding. Place your photo-negative transparency ink side down on top of your photopolymer plate and place between the frame back and acrylic top.

Washing Photopolymer Plates

After exposure is complete, use a sink or dishpan to wash your design. Using water and a soft brush hold the plate under the water and brush your design. The unexposed polymers will wash away. Continue to brush your design until the plate feels clean and the metal is exposed. Let your plate dry.