Goldie White Iron™ Powder Clay

Goldie White Iron

Goldie Iron comes in five different colors. This is White Iron, which has the color of iron. The powder, in addition to iron (the main component) consists of metals such as brass, copper and bronze. Shrinkage: 5 - 11%

This clay comes in dry powder form. The dry powder can be kept for years. Mix only the amount you need so you always have fresh clay with the perfect texture. You'll have longer working time and a more workable product when the clay is mixed fresh as you need it.

TO MIX

·Put the all amount of powder into a jar or bowl.

·Add about a dozen drops of water or spray in a little water and mix well with a knife or spoon, adding more water as required, until you get a clay of a plasticine like consistency.

·Roll the lump clay out thinly and fold over. Roll again, rolling away from the fold. Repeat this action several times. This is very important to ensure that all the air is removed from the clay and to get a smooth consistency before using. Insert into a plastic bag and wait for 30 minutes.

TO USE

·To join elements in Goldie Iron™ clay mix a little powder with water to make a paste. Elements can also be joined with the water only method in the same way as silver clay.

·Pieces can be dried naturally or by using heat, e.g. on a hotplate or in a dehydrator. Dry at 90°C (195°F) or lower. Higher temperatures may cause cracking, and the creation of steam bubbles.

·Remember to always clean your tools well between using different types of metal clay to avoid cross contamination. The above comment does not apply to metals from the Goldie Metal™ line, because you can mix them together with Mokume Gane, or other techniques.

TO FIRE

Ensure the clay is completely dry before firing. Any moisture will boil and ruin the piece.

In the two-stage firing, follow the table: