Adjustable Blade Strip Cutting Tool

Create perfectly parallel strips of clay in just about any width up to 1/2" (12mm) with this hand blade tool.

The tool comes with five blades and 12 pairs of brass washers. Arrange the blades and washers in a variety of configurations to achieve the cut width you want. For example, use two blades with all 12 washer pairs to create a single strip approximately 1/2" wide. Or use all five blades separated by single washer pairs to create four strips approximately 1/32" (0.8mm) wide.

Mix and match blades and washers to achieve whatever width (or widths) you like. Roll out your metal clay to an even thickness, then hold the blade tool at a slight angle, apply firm pressure and pull the blades through the clay slowly and smoothly.

Made in USA