Art Clay™ Silver Clay Syringe

Art Clay Silver Clay Syringe

Apply fine details, fill cracks, close seams, add piping and attach findings to wet or dry clay. Use for drawing decorations, building up 3D design, and filling up small gaps. If you cut end of a nozzle, you can draw wider. The consistency of Syringe Type is a bit harder than Paste Type. This gives more workability and allows more controllable designs.

Kiln Fire: 1200°F / 650°C - 30 minutes

Torch Fire: Red Glow for 5 minutes

Shrinkage: 8-9% 

• Consists of pure silver particles, binding agent and water. The binding agent is produced from natural pulp fiber.
• During firing, the pure silver particles solidify, and turn into pure silver (over 99.96%) . The binding agent consists of carbon, hydrogen and oxygen, and when fired, results in the release of a small amount of carbon dioxide and steam during the firing process.
• This product is low temperature - firing clay that can be fired from 650℃/1200°F, and turns into pure silver (over 99.96%) after firing. The special formula of this product allows for combining with glass, porcelain and ceramic materials, and is also suitable for firing with sterling silver finding or wire. (Use of SV925 and higher quality and the firing temperature at 650℃/1200°F, and holding time for 30 minutes is recommended).
• The surface of the fired piece will be white and matte due to crystallization of silver during firing, but a luster can be obtained by polishing.

INTERNATIONAL CUSTOMERS

We are authorized only to ship Art Clay products to the following North American locations: United States, Canada, Puerto Rico, the U.S. territories and military bases ONLY. For international customers outside our territory, please purchase from your local distributor.

Certified Customers: If you have a certified account with us, please note this in the special instructions box before check out and we will adjust the discount for you.