Paragon Caldera Digital Kiln

Power Consumption
The SC2 plugs into a 3-prong household outlet and draws 600 watts. Hourly cost to operate on average: 6 cents.

Kiln Location
Place the SC2 on a counter top or table without worry; the surface will not heat during firing thanks to the elevated firing box. Double-walled construction keeps the outside case cool, even at extended firing times.

Maintenance
Your kiln will give you years of trouble-free service as long as you are good to it. Keep the inside clean, don't gouge the fiber walls, don't fire directly on the floor, etc. The Paragon SC2 kiln has a ceramic fiber interior with the heating elements embedded and protected within the shell. The heating elements have a lifespan that is use-dependent, and for most people, will last for years. When it is time to replace the heating elements, the ceramic fiber shell, called a muffle, is replaced.

Warranty
The kiln is warrantied to be free of defects in workmanship for a period of 1 year from date of shipment. Manufacturer will repair or replace any parts that become defective under normal and proper use during the specified period.


Delivery
Free Shipping in the U.S.
Standard colors normally ship 1-2 weeks from order, but can take up to 2-3 weeks during promotions and holidays. Please allow at least 2 weeks time for your customized kiln to be built and shipped. When your kiln arrives, call us at 888-478-5060 for setup assistance if you need it. We'll have you up and running in minutes.

International Voltages
This model can be ordered in different voltages for destinations outside the United States. Please contact us for special voltage at no extra charge.

We can help! Check out our resources for helping you choose the right kiln for your studio.

Comparing the SC-2 and SC-2 Pro Upgrade
The venerable SC-2 has been in production since 1997. It is a proven design that we have steadily refined over the years. Thousands of artists in the U.S., Canada, Europe, and Japan love their SC-2.
The sleek SC-2 Pro has the same ceramic fiber firing chamber as the standard SC-2. In addition, the SC-2 Pro features a brushed stainless steel door with an easy-to-open 9” long wooden handle. The door opens and closes gently with an adjustable, spring-loaded catch on the bottom. The control panel is sloped for easy viewing and operation of the controller. The doors on both kilns open 180 degrees to give you full access to the interior. The SC-2 Pro also has an easy-access back panel for quick maintenance.
Solid State Relay
The SC-2 Pro elements are powered by a quiet, solid state relay. For your security, the solid state relay is backed by a mechanical safety relay that turns off the heating elements should the solid state relay ever fail.
A Proven Design
The high-tech ceramic fiber firing chamber is wrapped in a steel inner case. The outer steel case remains cool due to the air gap under it. In addition, the case is slotted for air circulation. Electrical components, located in the base, stay cool even at extended hold times.
Large Yet Portable
The SC-2 Pro can hold three shelves of silver clay yet is portable enough to take with you to classes. Program the firing schedule that is perfect for your projects. The kiln turns itself off after the firing is completed. (Please note, however, that you should be near the kiln during operation.) The SC-2 Pro is great in classrooms because the elements are embedded in ceramic fiber.
Even Heat Distribution
As with the standard SC-2, the SC-2 Pro has separate heating elements in the left and right sides of the firing chamber. The back of the chamber has no element, so the heat distribution in the SC-2 Pro is even throughout the firing chamber, because heat does not build up in the back.
SC-2 Pro Features:

On/off switchSolid state relayMechanical safety relayDoor opens 180 degrees for easy loadingSlotted case for air circulationElectrical components in the base stay cool even at extended hold timesThe embedded side elements for improved heat distributionTop vent complete with tapered plug for lost wax castingIncludes a 1/4” thick ceramic fiber shelfPower cord located out of the way at the back of the SC-2 Pro cabinetOptional SC-2 Pro glass view portOptional 6 1/2” wide bead door with mandrel holderPrinted 28-page kiln instruction manualGenesis Temperature Controller

Genesis Controller

The Genesis Controller has a modern and intuitive user platform with touch-screen technology for an effortless user interface. It can store up to 12 custom user programs with up to 32 segments per program and has the ability to make adjustments during a firing such as add segments, add temperature, and skip segments. Additionally, the easy-to-follow screen descriptions and graphical display of the firing process, allow the Genesis kiln controller to make firing kilns extremely straightforward. 

Max. Temperature 2000ºF 1093ºC Amps 12 Phase 1 Watts 1440 Nema 5-15P Breaker Size 15 Circuit Wire Size 14 gauge TUV tested to CSA and UL Standard 499 Y CE Y Control Type Sentry Digital 3-key Glass Control Voltage 120 Hertz 60 Disclaimer: The specifications above assume that the kiln will be plugged into a dedicated circuit. Local electric codes supersede our recommendations. The pricing and electrical specifications for the above products reflect their design for use in the United States. The International versions of most models will have variations in electrical specifications and price due to consumer safety requirements or electrical regulations.

Kiln Type Front Loading Square Sides 4 Understanding Chamber Measurements Chamber Volume 0.21 CU.FT. 5.95 litres Chamber Width 8.00 IN 203 mm Chamber Depth 7.75 IN 197 mm Chamber Height 5.75 IN 146 mm The Outer Size of the Kiln and the Shipping Size: Width = Left to Right; Depth = Front to Back; Height = Top to Bottom Outer Size 13.50W x 16.25D x 15.50H Inches 343W x 413D x 394H mm Ship Size 21.50W x 18.75D x 16.50H Inches 546W x 476D x 419H mm Ship Weight 36.00 Lbs. 16.33 Kg. Doorway Clearance Needed 13.50 Inches 342.90 mm Ship Method & Notations This Kiln Ships Via UPS