Sculpt Nouveau Metal Finishes - Darkening

Sculpt Nouveau Metal Finishes - Darkening

Previously: Swellegant Metal Coating - Darkening

Sculpt Nouveau Metal Finishes are finely ground metals suspended in a binder that can be painted on with a brush. They work on just about anything – wood, ceramic, polymer clay, resin, glass, foam, metal, plaster and more.

Preparation:
Clean the surface of the item to be coated, if necessary. Soap and water will remove any oils. If the surface to be coated is slick or shiny, you may want to rough it up a bit with sandpaper or fine steel wool. Then, start creating!

Metal coatings do not need to be heat treated. They take 4-6 hours to cure, at which point, burnishing will expose the metal in the coating. Detailed instructions also come on the bottle.

Made in the USA

About Sculpt Nouveau

The Sculpt Nouveau line is made up of Metal Coatings, Patinas, Dye Oxides and Clear Sealants. They are perfect for adding color to your creations!

Each product can be used alone or together to mix and match for endless design possibilities. All the Sculpt Nouveau products can easily be painted on with a brush and used with a variety of products.

Click Here for Christi Friesen's step-by-step instructions for tips and tricks to getting the best results!