Sully's Clay Micro Cutters - Mirrored Dino

Sully's Clay Micro Cutters - Mirrored Dino

Each Dino Cutter size comes with a push stamp and 2 cutters which mirror each other - perfect for earrings!

How to Use

1. Prepare the Clay - Roll your clay to your desired thickness. Lightly add release such as CoolSlip to the cutting edge of the clay cutter to help prevent sticking.

2. Cut the Clay - Position the cutter on the clay and press down firmly and evenly to cut your shape.

3. Clay Stuck in the Cutter? - Apply a small amount of release to the end of the push stamp. Align the size indicators so the stamp fits correctly inside the cutter, then gently press down. The clay should release easily.

4. Dry & Fire - Allow your clay to dry completely, then fire according to the manufacturer’s instructions for your chosen metal clay.

Tip! The push stamp doubles as a detailing tool. Apply a light coat of oil to the stamp surface and test it on a piece of scrap clay first. Experiment with the pressure to achieve your desired impression and depth.

Care Instructions - Hand wash only using warm, soapy water. Do not use boiling water, bake, or expose the cutter or stamp to high temperatures.

Material – Made from Polylactic Acid (PLA), a bio-based thermoplastic produced from renewable resources such as corn starch and sugarcane. Cutter color may vary.

How They’re Made – Each cutter and stamp is individually 3D printed using FDM (Fused Deposition Modeling). Due to the nature of the 3D printing process, fine layer lines may occasionally transfer to the clay. Please take this into consideration before purchasing.

Micro Cutter Blade Thickness:  Approximately 0.20 - 0.25mm

Available Sizes: 10mm, 12mm & 15mm